Robo-Dou Ingram Reactive Armor equipped Units 1 to 3 (Threezero)

As threezero's new Robodo figure based on Mobile Police Patlabor, a reactive armor equipped version of Ingram from the movie Mobile Police Patlabor 2 the Movie is now available! Units 1, 2, and 3 wearing reactive armor will be released at the same time, and pre-orders will start at the threezero store from 10:00 a.m. Japan time on May 8, 2024! threezero store product page:Robo-Dou Ingram Unit 1 Reactive Armor EquippedRobo-Dou Ingram Unit 2 Reactive Armor EquippedRobo-Dou Ingram Unit 3 Reactive Armor EquippedMobile Police Patlabor 2 the Movie Robo-Dou Ingram Unit 1 Reactive Armor EquippedThreezero's new Robodo figure based on Mobile Police Patlabor is a reactive armor equipped version of Ingram from the movie Mobile Police Patlabor 2 the Movie! Units 1, 2, and 3 equipped with reactive armor will be released at the same time.Robodo Ingram Unit 1 Reactive Armor Equipped is a 1/35 scale (approximately 23cm tall) movable figure made of ABS, PVC, POM, zinc alloy die-cast, and cloth. Zinc alloy die-casting is used for the movable frame, which allows for a total of approximately 50 movable points throughout the body. By using cloth for the joint covers of the arms and thighs, it is possible to recreate Ingram's silhouette while also allowing movement. The characteristic reactive armor jacket part is made of soft PVC and precisely reproduces the details. In addition, the fabric and reactive armor jacket are lightly coated with threezero's specialty weathering paint to further enhance the realistic look.Robo-Dou Ingram Unit 1 Reactive Armor Equipped is also equipped with various gimmicks to improve playability. The side cover on the right calf can be opened and closed, and a hand revolver cannon can be stored inside. In addition, the right wrist extension gimmick allows you to recreate the gimmick of reaching for the hand revolver cannon when it is stored. The front of the reactive armor jacket is removable, and the cockpit hatch underneath can be opened and closed. In the seat in the cockpit, you can mount the pilot figure (non-movable) of Akira Izumino, designed for the ``Mobile Police Patlabor 2 the Movie'' version. The cockpit seat can be raised and lowered, and the bulletproof windshield can be deployed to allow the pilot's head to peek out from under Ingram's neck. Equipment includes a hand revolver cannon, a stun stick (extended and retracted), a riot gun, and a shield for the left forearm (the retracted stun stick can be stored inside). In addition, interchangeable parts include a face part covered with a face guard, various wrist parts with different poses, and a robot road common action stand.specification1/35 scale, height approx. 23cmMade of ABS&PVC&POM&zinc alloy (joint cover is made of cloth, reactive armor jacket is made of soft PVC)Fully movable figure with a total of approximately 50 movable points throughout the body.The side cover on the right calf can be opened and closed (hand revolver cannon can be stored inside)Right wrist is extendableCockpit hatch can be opened and closed (after removing the front part of the reactive armor jacket)Cockpit seat can be raised and loweredBulletproof windshield at the neck can be expandedaccessorieshand revolver canonStun stick (extended)Stun stick (shrunken state)riot gunShield for left forearm (can store stun stick in a retracted state)Interchangeable face parts covered with face guardVarious interchangeable wrist parts: 1 pair of hands in a relaxed pose, 1 pair of hands in a wide open pose, 1 pair of fists, right hand for holding a hand revolver cannon, 1 pair of hands for holding a stun stick, right hand for holding a Riot gun )Pilot figure (Akira Izumino)robot road action standMaterial: ABS, PVC, POM, zinc alloy, clothPre-order sales start at threezero store: Scheduled to start from late April to early May 2024 Price at threezero store: USD 149.00 / JPY 23,300 + shipping Scheduled shipping date: 4th quarter of 2024View full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeMobile Police Patlabor 2 the Movie Robo-Dou Ingram Unit 2 Reactive Armor EquippedThreezero's new Robodo figure based on Mobile Police Patlabor is a reactive armor equipped version of Ingram from the movie Mobile Police Patlabor 2 the Movie! Units 1, 2, and 3 equipped with reactive armor will be released at the same time.Robodo Ingram Unit 2 Reactive Armor Equipped is a 1/35 scale (approximately 23cm tall) movable figure made of ABS, PVC, POM, zinc alloy die-cast, and cloth. Zinc alloy die-casting is used for the movable frame, which allows for a total of approximately 50 movable points throughout the body. By using cloth to cover the joints of the arms and thighs, it is possible to recreate Ingram's silhouette while also allowing movement. The characteristic reactive armor jacket is made of soft PVC and precisely reproduces the details. In addition, the fabric and reactive armor jacket are lightly coated with threezero's specialty weathering paint to further enhance the realistic look.Robo-Dou Ingram Unit 2 Reactive Armor Equipped is also equipped with various gimmicks to improve playability. The side cover on the right calf can be opened and closed, and a hand revolver cannon can be stored inside. In addition, the right wrist extension gimmick allows you to recreate the gimmick of reaching for the hand revolver cannon when it is stored. The front of the reactive armor jacket is removable, and the cockpit hatch underneath can be opened and closed. In the seat in the cockpit, you can mount the pilot figure (non-movable) of Isao Ota, which was designed in the ``Mobile Police Patlabor 2 the Movie'' version. The cockpit seat can be raised and lowered, and the bulletproof windshield can be deployed to allow the pilot's head to peek out from under Ingram's neck. Equipment includes a hand revolver cannon, a stun stick (extended and retracted), a riot gun, and a shield for the left forearm (the retracted stun stick can be stored inside). In addition, various interchangeable wrist parts with different poses and a robot road common action stand are included.specification1/35 scale, height approx. 23cmMade of ABS&PVC&POM&zinc alloy (joint cover is made of cloth, reactive armor jacket is made of soft PVC)Fully movable figure with a total of approximately 50 movable points throughout the body.The side cover on the right calf can be opened and closed (hand revolver cannon can be stored inside)Right wrist is extendableCockpit hatch can be opened and closed (after removing the front part of the reactive armor jacket)Cockpit seat can be raised and loweredBulletproof windshield at the neck can be expandedaccessorieshand revolver canonStun stick (extended)Stun stick (shrunken state)riot gunShield for left forearm (can store stun stick in a retracted state)Various interchangeable wrist parts: 1 pair of hands in a relaxed pose, 1 pair of hands in a wide open pose, 1 pair of fists, right hand for holding a hand revolver cannon, 1 pair of hands for holding a stun stick, right hand for holding a Riot gun )Pilot figure (Isao Ota)robot road action standMaterial: ABS, PVC, POM, zinc alloy, clothPre-order sales start at threezero store: Scheduled to start from late April to early May 2024 Price at threezero store: USD 149.00 / JPY 23,300 + shipping Scheduled shipping date: 4th quarter of 2024View full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeMobile Police Patlabor 2 the Movie Robo-Dou Ingram Unit 3 Reactive Armor EquippedThreezero's new Robodo figure based on Mobile Police Patlabor is a reactive armor equipped version of Ingram from the movie Mobile Police Patlabor 2 the Movie! Units 1, 2, and 3 equipped with reactive armor will be released at the same time.Robo-Dou Ingram Unit 3 Reactive Armor Equipped is a 1/35 scale (approximately 23cm tall) movable figure made of ABS, PVC, POM, zinc alloy die-cast, and cloth. Zinc alloy die-casting is used for the movable frame, which allows for a total of approximately 50 movable points throughout the body. By using cloth for the joint covers of the arms and thighs, it is possible to recreate Ingram's silhouette while also allowing movement. The characteristic reactive armor jacket part is made of soft PVC and precisely reproduces the details. In addition, the fabric and reactive armor jacket are lightly coated with threezero's specialty weathering paint to further enhance the realistic look.Robo-Dou Ingram Unit 3 Reactive Armor Equipped is also equipped with various gimmicks to improve playability. The side cover on the right calf can be opened and closed, and a hand revolver cannon can be stored inside. In addition, the right wrist extension gimmick allows you to recreate the gimmick of reaching for the hand revolver cannon when it is stored. The front of the reactive armor jacket is removable, and the cockpit hatch underneath can be opened and closed. In the seat in the cockpit, you can mount a pilot figure (non-movable) of Shinobu Nagumo, designed in the ``Mobile Police Patlabor 2 the Movie'' version. The cockpit seat can be raised and lowered, and the bulletproof windshield can be deployed to allow the pilot's head to peek out from under Ingram's neck. The ECM-deployed head, which was impressive in the movie, is recreated with some interchangeable parts. Equipment includes a hand revolver cannon, a stun stick (extended and retracted), a riot gun, and a shield for the left forearm (the retracted stun stick can be stored inside). In addition, various interchangeable wrist parts with different poses and a robot road common action stand are included.specification1/35 scale, height approx. 23cmMade of ABS&PVC&POM&zinc alloy (joint cover is made of cloth, reactive armor jacket is made of soft PVC)Fully movable figure with a total of approximately 50 movable points throughout the body.The side cover on the right calf can be opened and closed (hand revolver cannon can be stored inside)Right wrist is extendableCockpit hatch can be opened and closed (after removing the front part of the reactive armor jacket)Cockpit seat can be raised and loweredBulletproof windshield at the neck can be expandedaccessorieshand revolver canonStun stick (extended)Stun stick (shrunken state)riot gunShield for left forearm (can store stun stick in a retracted state)Replaceable head parts for reproducing the ECM deployment stateVarious interchangeable wrist parts: 1 pair of hands in a relaxed pose, 1 pair of hands in a wide open pose, 1 pair of fists, right hand for holding a hand revolver cannon, 1 pair of hands for holding a stun stick, right hand for holding a Riot gun )Pilot figure (Shinobu Nagumo)robot road action standMaterial: ABS, PVC, POM, zinc alloy, clothPre-order sales start at threezero store: May 8, 2024, 10am Japan time Price at threezero store: USD 149.00 / JPY 23,300 + shipping Scheduled shipping date: Q4 2024View full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full sizeView full size*The image is under development. The final product may differ.©HEADGEAR